AVIDO QC12Y 6*2500 hydraulic shearing machine with E21S
AVIDO swing beam shearing machine offer excellent cutting results and minimal deformation on small strips.It is a hydraulic transmission of the shear machine, relying on the rotation of the tool holder to achieve the shear process.
- ESTUN E21S special numerical control system
- Circular guide and ball screw backgauge
- The motors for backgauge are controlled by inverter, which can achieve high positioning accuracy 0.05mm of the backgauge by changing the frequency and voltage of motor.
- Top blade with two cutting edges and bottom blade with four cutting edges (6CrW2Si).
- X axis(Backgauge) and cutting time can be programmed by E21S system controller, which can store up to 40 groups of programs.
- Hydraulic overload can be protected by overflow valve, knife rack returns by Nitrogen cylinders.
- Foot switch with emergency button can stop the machine immediately when accident happens.
- Adjusting knife gap between upper and bottom blades can achieve better cutting performance.
- Front arms with ruler and roll balls can ensure the cutting accuracy and feed the material easily.
E21S system introduction
- Backgauge(X axis ) movement control
- Control AC motor or inverter
- Intelligent and unilateral positioning
- Work-piece counting function
- Double programmable digital output
- 40 programs stored, 25 steps per program
- One key back-up/restore of parameters
- Unit for mm/inch
- Language for Chinese/English
|1||Max cutting thickness||mm||6|
|2||Max cutting length||mm||2500|
|4||Cutting angle||° (degree)||1°30′|
|5||Cutting speed||Cutting times/minutes||12|
|9||Spring pressure cylinder||pcs||10|